Xerox WORKCENTRE 7428 System Administrator Manual page 31

11. To select a banner sheet tray:
a. On the Other Settings screen, in the Items column, touch Banner Sheet Tray, then touch
Change Settings.
b. Select the tray that will hold the banner sheet paper.
c. Tray 3 is the suggested choice, with Tray 4 as the secondary tray.
12. Touch Save.
Set the Ethernet Speed
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the Properties tab.
3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.
4. Click the Connectivity folder, then the Physical Connections folder.
5. Click Ethernet.
6. Select your network speed from the drop down list.
7. Click Apply, then click Reboot Machine.
Configure TCP/IP Settings
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the Properties tab.
3. Click the Connectivity folder, then the Protocols folder.
4. Click TCP/IP.
5. Review the available selections as displayed on your screen and explained in the TCP/IP
Configuration Selection List, below.
6. Accept the default Host Name, or type in your own unique Host Name for this printer.
7. Select the desired method for obtaining an IP Address.
8. If Static is selected, type in the addresses that apply for IP Address, Subnet Mask, and Gateway.
Caution:
Changing the IP address for the printer will affect NetBIOS/IP, LPR/LPD, FTP, SNMP, and Port
9100 printing. It will also interrupt the ability to communicate with the printer using the
CentreWare Internet Services. When you change the printer's IP Address, make sure to print out a
Configuration Report so that you have a record of the TCP/IP addresses for use with computers that
need to communicate with the printer using TCP/IP.
Note: If DHCP or BOOTP addressing method is selected, you cannot manually change the IP Address,
Subnet Mask, or Gateway. Select Manual if you wish to manually enter these addresses.
Note: When using DHCP, set a reasonably long Lease Time for the IP Address so that the printer can be
restarted, when taken out of service for maintenance, without being assigned a new IP Address.
Note: Upon rebooting, when the system comes up, if it can't locate a DHCP server on the network it will
use whatever IP address it was previously configured with.
CentreWare Internet Services
WorkCentre 7425/7428/7435
System Administrator Guide
31