In Windows Nt 4.0 - Xerox WorkCentre Pro 385 User Manual

In Windows NT 4.0

You can access printer settings by using any of these methods:
n
Select the Print or Print Setup command from within any Windows
application. This method will provide access to the Paper/Output,
Image Quality and About tabs only.
Or
n
Select the printer from the Printers folder, and then select the
Properties command from the File menu. This method will provide
access to the General and Details tabs, as well as the Paper/Output,
Image Quality and About tabs.
Or
n
Select the printer from the Printers folder, click the right mouse button,
and then select Properties from the drop-down list. This method will
provide access to the General and Details tabs, as well as the Paper/
Output, Image Quality and About tabs.
When you see the Printer Properties displayed, you can then review and
change whatever settings are needed for your print job. If accessed through
the Printers folder, the Printer Properties consists of four tabs:
n
Paper/Output Tab - for paper sources and sizes, number of copies, etc.
n
Image Quality Tab - for image quality
n
Advanced Tab - for advanced printer settings
n
About Tab - for product identification and information
Printer Settings 5-13
5