Xerox WorkCentre Pro 385 User Manual page 92

8
Using the Number keypad, enter the time the fax will be sent. Use the
Up or Down button to switch between AM and PM. If you set a time
earlier than the current time, the document will be sent at that time on
the following day.
9
After entering the time, press the Enter button.
10
The machine scans the document into memory, returns to Standby
mode and displays a reminder that a Delayed Transmission is set.
Note: If you want to cancel the Delayed Transmission, see Canceling a
Standby Operation on page 3-14 .
Adding Documents To a Standby Operation
You can add documents to a Delayed Transmission previously entered into
memory.
1
Place the document face down in the Automatic Document Feeder. If
necessary, adjust the resolution and contrast. For details, see Resolution
on page 3-21 and Contrast on page 3-23.
2
Press the Menu button.
3
Press the Add/Cancel button on the One-Touch keypad. The LCD
display prompts you to select ADD or CANCEL. Note that 1. Add is
already selected in the LCD display.
OPERATION
1.ADD 2.CANCEL
Manual Faxing 3-13
3