Xerox WorkCentre Pro 385 User Manual page 128

5
The display prompts you to enter the poll code. The last used poll code
is displayed.
6
Enter the 4-digit Poll code you had previously set, then press the Enter
button.
The display prompts you to select 1.ADD or 2.CANCEL.
7
Press 1. The machine scans the new documents into memory and
returns to Standby mode.
Cancelling a Job Already in Memory Which is
Waiting to be Polled
If you want to cancel a job already in memory waiting to be polled, follow
the procedure below.
1
Press the Menu button.
2
Press the Add/Cancel button on the One-Touch keypad. The LCD
display prompts you to select 1.ADD or 2.CANCEL.
3
Press 2.
The set up information for the last entered polling job is displayed. If
you have more than one polling job waiting in memory, press the UP or
DOWN arrows until the set up information for the job you wish to
cancel is displayed.
4
Press the Enter button.
The display prompts ARE YOU SURE?
5
To cancel the polling job, press 1.YES.
The job is erased from memory and the machine returns to Standby
mode.
Polling 3-37
3