Xerox WorkCentre Pro 385 User Manual page 279

Tips for Avoiding Paper Jams
By carefully selecting print materials and loading them properly, you
should be able to avoid most paper jams. If jams do occur, follow the steps
outlined in Clearing Jams on page 7-2. If jams occur frequently, make sure
that you are following these tips to avoid jams.
n
Follow the procedures in Loading Paper on page 1-15 to load paper
properly. Make sure the adjustable paper guides are positioned
correctly.
n
Do not overload the paper. Never exceed the maximum capacity of 150
sheets of paper in the Automatic Paper Feeder.
n
Flex, fan, and straighten paper before loading it.
n
Do not load wrinkled, creased, damp, or highly curled paper.
n
Do not mix paper types.
n
Use only recommended print paper.
n
Ensure that the recommended print side is facing up when loading
paper into the feeder.
n
Store print materials in an acceptable environment.
LCD Display Error Messages
LCD Display
RETRY REDIAL?
COMM. ERROR
7-8 Troubleshooting
Meaning
The machine is waiting
for the programmed
interval to automatically
redial a previously busy
station.
There is a fax
communications
problem.
Solution
You can press Start to
immediately redial, or
Stop to cancel the redial
operation.
Try faxing again.