Xerox WorkCentre Pro 385 User Manual page 365

n
REMOTE CODE - The remote receive start code allows you to initiate
fax reception from an extension phone plugged into the EXT. LINE
jack on the back of the machine. If you pick up the extension phone
and hear fax tones, enter the Remote Code and the machine will start
receiving. The Remote Code is preset to *9* at factory. You may
change the Remote Code by selecting any number from 0 to 9 on the
numeric keypad.
n
POWER SAVING - The power saving menu item lets you reduce
power usage when the printer is idle.
Press 1 to turn the feature ON. The display asks you to determine the
length of time the printer waits after printing a job before going to a
reduced power state. Press one of the following:
l
1 for 10 minutes
l
2 for 15 minutes
l
3 for 30 minutes
l
4 for 45 minutes
l
5 for 60 minutes
Or
If your printer is used constantly, press 2 to turn Power Saving OFF.
This keeps the printer ready to print with minimum warm-up time.
n
DIAL MODE - Select the type of dial system your fax machine is
connected to:
Press 1 if the fax machine is connected to a tone (Touch Tone) dial line.
Press 2 if the fax machine is connected to a pulse (Rotary) dial line.
System Setup 1-49
1