Xerox WorkCentre Pro 385 User Manual page 224

8
Adjust the scan options as desired before initiating the final scan.
9
Reload the document back into the Automatic Document Feeder.
10
Click the Scan button.
11
The document is scanned by the WorkCentre 385 and the updated
image is displayed in the TWAIN compliant application.
Starting the WorkCentre 385 TWAIN Scanner application from
TextBridge Pro
1
From the File menu, click on Select Scanner. A list of supported
scanners will be displayed.
2
From the list, select Xerox WorkCentre 385 (TWAIN). Click OK.
3
From the TextBridge Pro Process menu, select Get Page. A Page Type
dialog will be displayed.
4
Select the desired page type and select Scanner as the Page Source.
Click OK.
5
The WorkCentre 385 TWAIN Scanner application is displayed. Select
the appropriate scan options for the document or photograph to be
scanned.
After adjusting the settings in the Scan window, you can perform a
preliminary preview scan of the image before performing a final scan.
To launch a preview scan:
a)
Load the document to be scanned in the Automatic Document
Feeder.
b)
Click the Prescan button.
The WorkCentre 385 scans the image and a preview appears in the
WorkCentre 385 TWAIN Scanner window.
Overview 6-5
6