Xerox WorkCentre Pro 385 User Manual page 124

4
Press the Enter button to confirm TX POLL. The display prompts you
to enter a 4-digit poll code.
Note: The poll code is preset to 0000 at the factory. This setting
represents no poll code.
5
If you want to use a poll code, enter a 4-digit code.
6
Press the Enter button.
Or
If you do not want to secure the transmission with a Poll code, press the
Enter button when the display shows 0000 for TX-POLL CODE. If you
previously entered a poll code, and do not want one, you may enter
0000 and then press the Enter button.
7
The display prompts you to store the document in the machine bulletin
board memory.
Note: If you store the document in the bulletin board memory, more than
one remote station can poll that document from your machine. If not, the file
will be automatically erased after being polled by a remote machine.
BULLETIN ?
Polling 3-35
3