Laser Safety Information; Ozone Safety Information; For Consumables - Xerox Phaser 3635MFP/S User Manual

1 Welcome
10
Standard: IEC60950-1, 2001
USA/CANADA: This XEROX product is certified by the following Agency
using the Safety Standards listed.
Agency: UNDERWRITERS LABORATORIES
Standard: UL60950-1, 2003 Edition. Certification is based on reciprocity
agreements, which include requirements for Canada.

Laser Safety Information

CAUTION:
Use of controls, adjustments or performance of procedure
other than those specified herein may result in hazardous light
exposure.
With specific regard to laser safety, the equipment complies with performance
standards for laser product set by government, national and international
agencies as a Class 1 laser product. It does not emit hazardous light, as the
beam is totally enclosed during all phases of customer operation and
maintenance.
WARNING:
Do not stare into the light source if the platen cover is in the up
position.

Ozone Safety Information

This product will produce ozone during normal operation. The ozone produced
is heavier than air and is dependent on copy volume. Providing the correct
environmental parameters as specified in the Xerox installation procedure will
ensure that the concentration levels meet safe limits.
If you need additional information about ozone, please request the Xerox
publication Ozone by calling 1-800-828-6571 in the United States and
Canada. In other markets please contact your authorized local dealer or
Service Provider.

For Consumables

• Store all consumables in accordance with the instructions given on the
package or container.
• Keep all consumables away from the reach of children.
• Never throw print cartridges or toner containers into an open flame.
• Cartridges: When handling cartridges, for example ink, fuser, etc, avoid
skin or eye contact. Eye contact can cause irritation and inflammation. Do
not attempt to disassemble the cartridge. This can increase the risk of skin
or eye contact.
Xerox Phaser 3635MFP User Guide