Operational Safety Information - Xerox Phaser 3635MFP/S User Manual

Operational Safety Information

Xerox Phaser 3635MFP User Guide
4.
Do not remove covers or guards that are fastened with screws. There are
no parts behind these covers that you can maintain or service.
Your Xerox equipment and supplies have been designed and tested to meet
strict safety requirements. These include safety agency examination,
approval, and compliance with established environmental standards.
To ensure the continued safe operation of your Xerox equipment, follow these
safety guidelines at all times:
Do These
• Always follow all warnings and instructions that are marked on or supplied
with the equipment.
• Before cleaning this product, unplug the product from the electrical outlet.
Always use materials specifically designated for this product, the use of
other materials may result in poor performance and create a hazardous
situation.
WARNING:
Do not use aerosol cleaners. Aerosol cleaners can be
explosive or flammable when used on electromechanical equipment
• Always exercise care when moving or relocating equipment. Please
contact your local Xerox Service Department to arrange relocation of the
copier to a location outside of your building.
• Always locate the machine on a solid support surface (not on plush carpet)
that has adequate strength to support the weight of the machine.
• Always locate the machine in an area that has adequate ventilation and
room for servicing.
• Always unplug this equipment from the electrical outlet before cleaning.
NOTE:
Your Xerox machine is equipped with an energy saving device to
conserve power when the machine is not in use. The machine may be left on
continuously.
WARNING:
The metallic surfaces in the fuser area are hot. Please use
caution when removing paper jams from this area and avoid touching
any metallic surfaces
Do Not Do These
• Never use a ground adapter plug to connect the equipment to a power
outlet that lacks a ground connection terminal.
• Never attempt any maintenance function that is not specifically described
in this documentation.
1 Welcome
7