Xerox Phaser 3635MFP/S User Manual page 198

11 Setups
192
Audio Tone Test
The Audio Tones Test verifies that the Audio Tone on the UI is functioning
properly.
1.
Select Start Test to begin the test. The Audio Tone will activate if it is
functioning properly.
2.
Select End Test to end the test. The Test Pass/Fail screen displays.
3.
Select the Passed button if the audio tones have sounded correctly.
Select the Failed button if any of the audio tones are not functioning
properly.
Display Pixel Test
The Display Pixel Test verifies that each pixel on the display is functioning
properly.
1.
Select Start Test to begin the test. The display will turn white.
2.
Press 2 on the keypad to toggle the display between white and black. If
the display is not all the same color, then the test was not successful.
3.
Press 1 on the keypad to conclude the test.
4.
Select the Passed button if all the screen on the User Interface changed
color from black to white, otherwise, select the Failed button.
LED Indicator Test
The LED Indicator test verifies that all of the lights on the control panel are
functioning properly.
1.
Select Start Test to begin the test. Each light will light for a short period
of time if it is functioning properly. The lights will continue to cycle until
the test is ended.
2.
Select End Test to end the test. The Test Pass/Fail screen displays.
3.
Select the Passed button if all the LEDs on the control panel are
functioning properly. Select the Failed button if any of the LEDs on the
control panel are not functioning properly.
Video Memory Test
The Video Memory Test verifies that the memory used by the video controller
on the User Interface is functioning properly.
1.
Select Start Test to begin the test. A message will be displayed
indicating whether or not the test was completed successfully.
Xerox Phaser 3635MFP User Guide