8 Print Files
2 Print the Job(s)
3 Job Status Screen
4 Stop the Job
140
NOTE:
Do not remove the USB drive from the device until printing has
completed.
Press the Start button.
To follow the progress of your
scanning job, press the Job Status
button on the control panel to
display the Job Status screen
The default Job Status screen
displays all incomplete jobs,
including the queued network scan
job. If there are no incomplete jobs
in progress, the message "No Active
Jobs" is displayed. For more
information on the Job Status
screen, refer to Job Status Screen in
the Copy chapter on page 41
Follow the steps below to manually cancel an activated job.
Xerox Phaser 3635MFP User Guide