Xerox Phaser 3635MFP/S User Manual page 222

14 Troubleshooting
Errors & Faults
Print cartridge Not
Installed
Toner Supplying Error
Invalid Toner Cartridge
Output Full Stack
Staple Cartridge Not
Installed
Stapler Fault
DADF DADF Jam
Load Document
216
Description
The print cartridge is not
installed, or is not installed
correctly.
Toner is not being supplied
correctly.
The installed print cartridge is
not a valid Xerox cartridge.
Output tray full.
Staple cartridge not installed.
Stapler unit does not work.
The loaded document has
jammed in the DADF.
You have attempted to set up
a job with document not
loaded or incorrectly loaded
in the DADF.
Solution
Install the print cartridge.
If already installed, check it has
been installed correctly.
If problem persists, call for service.
Check the print cartridge is
installed securely.
Check the print cartridge and install
a valid Xerox cartridge if
necessary.
If problem persists, call for service.
Remove printed material from
Output tray.
Install staple cartridge.
Open stapler door and check the
stapler. Close stapler door.
If the fault persists, Power Off /
Power On.
If the problem persists, call for
service.
Open DADF cover and remove
jammed media.
Load document in DADF.
If already loaded, remove and
reload.
Xerox Phaser 3635MFP User Guide