Fax Procedure - Xerox Phaser 3635MFP/S User Manual

4 Fax

Fax Procedure

1 Load the Documents
60
This section describes the basic procedure for sending faxes. Follow the steps
below.
Load the Documents – page 60
Select the Features – page 61
Color Faxing – page 63
Dial the Number - page 64
Start the Fax Job – page 64
Job Status Screen – page 64
Stop the Fax Job – page 64
NOTE:
If the authentication feature is enabled, you may need an account
number before using the machine. To get an account number, or for more
information, contact the System Administrator.
You can load the documents to be faxed either on the Document Glass or
through the Document Feeder.
For information on setting up the paper trays, refer to Setting up Paper Trays
in the Setups chapter on page 178.
Document Feeder:
The following steps explain how to load documents using the document
feeder:
1.
Before loading the documents into the document feeder, ensure they are
in good condition and remove all staples and paper clips.
2.
Insert the documents neatly into
the document feeder, face up. The
first page should be on top with
the headings towards the left of
the machine.
Xerox Phaser 3635MFP User Guide