Xerox Phaser 3635MFP/S User Manual page 181

11 Setups
The default selection for Junk Fax Prevention is Off so there is no filtering of
incoming faxes. Select the On button to switch on the feature. With the feature
switched on, the machine will block ALL incoming faxes listed in the Junk Fax
Numbers list.
Junk Fax Numbers List
To add a number to the list touch an empty list location to highlight it and then
touch the Edit List button.
Input the last 7 digits of the number you wish to block using the keypad and
then select the Save button.
Repeat this process for all the numbers you want to block up to a maximum of
10 numbers and then select the Save button.
To delete a number from this directory, touch the line number to highlight it,
then select the Edit List button. Press C (Clear) on the keypad to clear the
number and then select the Save button.
Receive Mode This feature allows you to switch between Telephone, Answering Machine/
Fax and Fax receive options.
Telephone
Use to operate in manual mode. When a call is received, pick up the external
phone handset. If a fax tone can be heard, press Start and replace the
handset.
Fax
The machine answers the incoming call and immediately switches to fax
receive mode.
Answering Machine/Fax
Use if attaching an answering machine to the machine. If the machine detects
a fax tone, it switches to fax mode automatically.
Remote Code When enabled, enter the external phone key (0-9) to start the fax receive.
Secure Polling The machine can be programmed to send documents in the user's absence
when polled. When enabled, a Polling Passcode is required to access the
documents stored for Secure Polling.
Add, Delete or Save passcodes to the Polling Passcodes list.
Retained Documents Policy
Tools > User Interface > Fax Service Settings > Documents Received in
Mailbox
Xerox Phaser 3635MFP User Guide 175