One-Touch Dialing; Storing A Number For One-Touch Dialing - Xerox FaxCentre F12 User Manual

One-Touch Dialing

Xerox FaxCentre F12 User Guide
The 25 one-touch buttons on the control panel lets you store
frequently used fax numbers and automatically dial a number
with one touch of a button.
Using the [26-50] button, you can store up to 50 fax numbers
on the one-touch buttons.

Storing a Number for One-Touch Dialing

Press and hold one of the one-touch dial buttons for about 2
Ø
seconds.
If you want to use one-touch dial buttons from 26 to 50, press
[26-50] then press and hold the one-touch dial buttons for
about 2 seconds.
The LCD display asks you to enter the fax number.
'T' signifies you are assigning a one-touch number and 'xx'
designates the selected one-touch button.
If a number is already stored in the location you chose, the
LCD display shows the number to allow you to change the
number. To start over with another one-touch button, press
[Stop/Clear].
Enter the number you want to store by using the number
Ø
keypad and then press [Enter].
To insert a pause between numbers, press [Redial/Pause]
and a '–' appears on the LCD display.
If you make a mistake while entering a number, press
[Search/Delete] and re-enter the correct number.
To assign a name to the number, enter the desired name.
Ø
For details on how to enter names, see "Entering
Characters Using the Numeric Keypad" on page 2-9.
Or,
If you do not want to assign a name, skip this step.
Page 5-19