Setting The Date And Time - Xerox FaxCentre F12 User Manual

Setting the Date and Time

Xerox FaxCentre F12 User Guide
The current time and date are shown on the display when the
machine is on and ready for faxing (Standby mode). The time
and date are printed on all faxes you send.
Press [Menu/Exit] on the control panel. The display shows
Ø
menu with the first menu item; 1:2-UP COPY indicated.
Press until '6:MACHINE SETUP' is indicated, then
Ø
press [Enter].
Press the or
Ø
& TIME' appears, then press [Enter].
Enter the correct date and time using the numeric keypad:
Ø
Day =
Month =
Year =
Hour =
=
Minute =
The date and time is entered and displayed in the following
order:
MM =
DD =
YY =
HH: =
MM =
You can also use
digit you want to correct, then enter a new number.
To Enter AM or PM for 12-hour format, press
Ø
Press [Enter] when the time and date on the display is
Ø
correct.
If you enter an invalid number, the machine beeps and does
not proceed to the next step. If this happens, just re-enter the
correct number.
The display shows the time and date you have set, then
returns to Standby mode.
navigation keys repeatedly until 'DATE
01 ~ 31
01 ~ 12
00 ~ 99
00 ~ 23 (24-hour mode)
01 ~ 12 (12-hour mode)
00 ~ 59
Month
Day
Year
Hour
Minute
or to move the cursor under the
or .
Page 2-23