Xerox FaxCentre F12 User Manual page 153

Xerox user guide printer/fax/scanner/copier faxcentre f12
Hide thumbs Also See for FaxCentre F12:
Table of Contents

Advertisement

Display
PAPER JAM 1
PAPER JAM 2
TONER EMPTY
TONER LOW
RETRY REDIAL
COMM. ERROR
GROUP NOT
AVAILABLE
LINE ERROR
FUNCTION FULL
NO ANSWER
Xerox FaxCentre F12 User Guide
Meaning
Paper has jammed in the fuser
area.
Paper has jammed in the paper
exit area.
The toner cartridge has run out.
The machine stops.
The toner is almost empty.
The machine is waiting for the
programmed interval to
automatically redial.
A problem with the fax
communications has occurred.
You have tried to Enter a group
location where only a single
location number can be used, such
as when adding locations for a
multi-dial operation.
Your unit cannot connect with the
remote machine, or has lost
contact because of a problem on
the phone line.
The memory has become full.
The remote machine was not
answered after all the redial
attempts.
Solution
Clear the jam. Refer to page 8-5.
Clear the jam.Refer to page 8-7.
Replace with a new toner
cartridge. Refer to page 7-6.
Take out the toner cartridge and
gently shake it. By doing this, you
can temporarily re-establish
printing operations.
You can press [Start] to
immediately redial, or [Stop] to
cancel the redial operation.
Try resending the fax.
Try again, check location for
group.
Try resending the fax. If failure
persists, wait an hour or more for
the line to clear then try again.
Either delete unnecessary
documents, or retransmit after
more memory becomes available.
You can also split the transmission
into more than one operation if it is
a large job.
Try resending the fax. Ensure the
remote machine is functioning
correctly.
Page 8-13

Advertisement

Table of Contents
loading

Table of Contents