Table of Contents
Advertisement
12.1
Checking the free travel of the hand brake lever
Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the hand brake lever, pressure builds up on the front brake circuit.
–
Set the free travel on the hand brake lever in accordance with the specification.
12.2
Adjusting the basic position of the hand brake lever
12.3
Checking the brake discs
Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
–
Make sure that worn-out brake discs are replaced immediately. (Your authorized GASGAS Motorcycles work-
shop will be glad to help.)
–
Push the hand brake lever forward and check free travel
Free travel of hand brake lever
»
If the free travel does not match the specification:
–
Adjust the basic position of the hand brake lever. (
A00823-10
Preparatory work
–
Check the free travel of the hand brake lever. (
Main work
–
Adjust the basic position of the hand brake lever to your hand size
by turning adjusting screw
Info
Turn the adjusting screw clockwise to increase the distance
between the hand brake lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the
distance between the hand brake lever and the handlebar.
The range of adjustment is limited.
A00798-11
Only turn the adjusting screw by hand, and do not use force.
Do not make any adjustments while riding.
–
Check the front and rear brake disc thickness at multiple points for
A
the dimension
Info
Wear reduces the thickness of the brake disc around the
contact surface of the brake linings.
Brake discs - wear limit
front
402404-10
≥ 3 mm (≥ 0.12 in)
p. 77)
1
.
.
2.5 mm (0.098 in)
BRAKE SYSTEM 12
A
.
p. 77)
77
Advertisement
Table of Contents
