Getparam; Setparam; Getparam 1271; Setparam 1271 - Teltonika FM1200 User Manual

6.1.11 getparam ####

Read parameter value. ID consists of 4 digits – first digit must be 1
and fourth identifies parameter ID as described in Parameter List chapter.
Response
details
ID
Value
Example: 'getparam 1245' command will request server IP address in profile1.

6.1.12 setparam #### #

Sets new value for parameter. ID consists of 4 digits – first digit identifies profile,
second, third and fourth identifies parameter ID as described in Parameter List chapter.
In value field a new parameter value is entered.
Example: 'setparam 1245 127.0.0.1' will change configured IP address in profile1
with new value

6.1.13 getparam 1271 #

# values can be 1,2,3.
If # = 1, Operator codes from 0-19 are read from configuration and sent via SMS.
If #= 2, Operator codes from 20-39 are read from configuration and sent via SMS.
If # = 3, Operator codes from 40-49 are read from configuration and sent via SMS.
If # = any other, Operator codes from 0-19 are read from configuration and sent via SMS.

6.1.14 setparam 1271 #

If # is from 0 to 49 , # means index of operator code which has to be configured. Up to 20
operator codes may be configured in 1 SMS. Example: Setparam 16 24602,24603,24605
th th
,here 16 , 17 and 18
unchanged in the configuration.

6.1.15 readops #

Send from device Operator List.
1 – send first 20 operator codes, 2 – send from 21
all other operator codes.

6.1.16 flush #,#,#,#,#,#,#

Initiates all data sending by GPRS to specified target server. Comma separated
parameters go as numbered:
1.# - IMEI
2.# - APN
3.# - GPRS LOGIN
4.# - GPRS PASSWORD
5.# - IP
FM1200 has only one profile (1)
Description
Profile number and parameter ID
Parameter value
th
operator codes are set. Note! Other operator codes are left
4
, second, third
st th
to 40 operator codes, 3 – send
50