Configuration; Configurator - Teltonika FM1200 User Manual

5.5 CONFIGURATION

5.6 Configurator

New FM1200 module has default factory settings. Settings should be changed
according to your application and your GSM operator information.
FM1200 configuration is performed via FM1200 Configurator program. FM1200
Configurator version can be downloaded from http://avl1.teltonika.lt/downloads/FM12/.
Contact sales manager to get the latest FM1200 Configurator version. FM1200
configurator operates on Microsoft Windows OS and uses MS .Net Framework 3.5 or
higher. Please ensure that MS .Net Framework 3.5 or later is installed on your PC before
starting configurator. Latest MS .Net Framework version can be downloaded from official
Microsoft web page.
Module configuration is performed over USB cable. Configuration process starts
from starting FM1200 Configurator program and then connecting to FM1200 device via
Connect button located on the top left corner of configurator. If connected successfully
IMEI, Version fields which were empty, now are filled with certain numbers depending on
Modem IMEI and firmware version of your device (figure below).
FM1200 has one user editable profile, which can be loaded from device, and saved.
User can also revert to default settings, by pressing Load Defaults button. After any
modification of configuration settings it has to be saved to FM1200 device, otherwise it
will not be written to device.
FM1200 Configurator is divided into 4 main areas: 1 – main button area, 2 –
information area, 3 –settings menu, 4 – parameters and values menu.
Figure 16. Configurator window (update)
24