Getparam; Setparam; Flush - Teltonika FM2100 User Manual

6.2.11 getparam ####

Read parameter value. ID consists of 4 digits – first digit identifies profile, second, third and
fourth identifies parameter ID as described in FMXXX Parameter and Functionality
document.
Response details Description
ID Profile number and parameter ID
Value Parameter value
Example: 'getparam 1245' command will request server IP address in profile1.

6.2.12 setparam #### #

Sets new value for parameter. ID consists of 4 digits - first digit identifies profile, second,
third and fourth identifies parameter ID as described in FMXXX Parameter and
Functionality document. In value field a new parameter value is entered.
Example: 'setparam 1245 127.0.0.1' will change configured IP address in profile1 with new value

6.2.13 flush #,#,#,#,#,#,#

Initiates all data sending by GPRS to specified target server. Comma separated parameters
go as numbered:
1.# - IMEI
2.# - APN
3.# - GPRS LOGIN
4.# - GPRS PASSWORD
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
Parameters are separated by comma (no spaces needed). In case you don't need to enter
parameter (Login/Pass) – do not put space, simply put comma and write next parameter.
Example: opa opa flush 353976012555151,banga,,,212.47.99.62,12050,0
28