Note: In order for Authorized driving to work properly, at least 1 iButton
ID must be written to the iButton list.
Immobilizer Scenario. Vehicle can be used only if iButton is connected. In this
scenario iButton list is not used; connect any iButton to pass Immobilizer security.
DOUT2 is controlled by scenario for user needs, to manage buzzer, LED, etc.
5.4.2 Trip
Trip customizable feature enables user extended monitoring of performed trips
(from engine start at present location to engine stop at arrived location), log their start
and stop points, view driven total distance
records) only when trip starts and finishes.
Note: Scenarios and Trip features are activated (DOUTs are activated)
only if DIN1=1 (ignition is on).
5.4.3 Geofencing
Geofencing is another feature which is highly customizable and can detect
wherever car enters or leaves customized areas. More about Geofencing can be read in
5.14.3 chapter.
Auto Geofencing feature if enabled is activated automatically by turning off car
ignition. Next time before driving user has to disable Auto Geofencing with iButton or by
turning on car ignition. In case of theft car leaves Auto Geofencing zone without
authorization FM1200 device automatically sends high priority record to AVL application.
5.4.4 iButton list
iButton list is used to enter authorized iButton ID codes, which are used to
authenticate driver in Authorized driving and Auto Geofencing options.
3
Continuous odometer – total driven distance, works only in TRIP mode. Continues distance is
counted only for ONE trip. If trip is finnished (stop point is detected), odometer resets to 0 (zero). Next trip
will start counting from the begining.
3
. Event will be generated (included into send
23