Installing Fm1200 Drivers - Teltonika FM1200 User Manual

Attach case, and screw in the screws

3.2 Installing FM1200 drivers

Software requirements:
• Operating system 32-bit and 64-bit: Windows XP with SP3 or later, Windows Vista,
Windows 7.
• MS .NET Framework V3.5 or later
http://avl1.teltonika.lt/downloads/tavl/Framework/dotnetfx35setupSP1.zip).
Drivers:
Please download
http://avl1.teltonika.lt/downloads/FM12/vcpdriver_v1.3.1_setup.zip
Installing drivers:
Extract and run VCPDriver_V1.3.1_Setup.exe. This driver is used to detect FM1200
device connected to the computer. Click 'Next' in driver installation window (figures
below):
This will launch device driver installation wizard. In the following window click 'Next'
button again:
(http://www.microsoft.com
Virtual COM Port
Figure 2. Driver installation window
Device is ready
or
drivers from Teltonika website:
12