Gsm Settings, Sms Part - Teltonika FM1200 User Manual

5.11 GSM settings, SMS part

Essential fields in 'SMS' part are 'Login' and 'Password'. The login and password
are used with every SMS sent to FM1200. If login and password are not set, in every
SMS sent to FM1200 device two spaces before command have to be used
(<space><space><command>).
Command structure with set login and password:
<login><space><password><space><command>, example: "asd 123 getgps"
Phone numbers have to be written in international standard, without using "+" or
"00" signs in prefix. If no numbers are entered, configuration and sending commands
over SMS are allowed from all GSM numbers.
SMS data sending settings – enable or disable periodic data and event SMS
usage. This setting does not affect replies to SMS request messages – answers are
always sent back to sender telephone number.
FM1200 can send binary SMS with 24-coordinates-in-one-SMS. It is used in areas
where no GPRS coverage is available. Module collects data and sends to server binary
SMS containing information about last 24 collected points. SMS sending schedule is set
in SMS Week Time tab. 24-Coordinates SMS decoding is described in "FMXXXX
Protocols" document.
Figure 19. GPRS configuration
Figure 20. SMS configuration
28