Parameters Settings; Figure 45: Wbm "Security" Page - "802.1X" - "802.1X Parameter Setting" Tab; Table 34: Wbm "Security" Page - "802.1X" - "Setting" Tab - WAGO 852-1322 Manual

852-1322/852-1328 Industrial Managed Switch
Table 34: WBM "Security" Page – "802.1X" – "Setting" Tab
Parameters
802.1x
Radius Server IP 0.0.0.0
Server Port
Accounting Port
NAS Identifier
Shared Key
Confirmed
Shared Key
7.6.3.2 IEEE 802
A setting tab page of the 802
Page – "802.1X" – "802.1X Parameter Setting" Tab". These parameters are
related to the authentication periods, the timeout durations, and the maximum
number of authentication requests. Table "WBM "Security" Page – "802.1X" –
"802.1X Parameter Setting" Tab" summarizes the descriptions of these
parameters and their default settings
parameters, a user should click on the [Update] button afterwards
Figure 45: WBM "Security" Page – "802.1X" – "802.1X Parameter Setting" Tab
Factory Default Description
Disabled Choose to Enable/Disable 802.1X for all ports
Set an IP address of the RADIUS server
1812 Set the port number of the RADIUS server. The range is
from 0 to 65535.
1813 Set the accounting port number of the RADIUS server. The
range is from 0 to 65535.
Managed Switch Specify the identifier string for the 802.1X Network Access
Server (NAS). The maximum length is 30 characters.
NULL A shared key between the managed switch and the RADIUS
Server. Both devices must be configured to use the same
key where the maximum length is 30 characters.
Dependent Re-type the shared key string.
.
1X Parameters Settings
1X parameters is shown in Figure "WBM "Security"
.
Configuration in the WBM
To keep the change of any input
.
71
.
Manual
1.0.01