Snmp V3 Auth; Figure 34: Wbm "Diagnostics" Page - "Snmp Tab", Snmp V3 Auth; Table 26: Wbm "Diagnostics" Page - "Snmp" Tab, Snmp V1/V2C Community - WAGO 852-1322 Manual

Managed switch; 8 port gb; macsec/ 6 port gb; 2foc; macsec

Hide thumbs Also See for 852-1322:

Table of Contents

852-1322/852-1328 Industrial Managed Switch

Table 26: WBM "Diagnostics" Page – "SNMP" Tab, SNMP V1/V2c Community Setting

Parameters

Trap Mode

Trap server IP

Port

Community

String

7.5.1.4

SNMP V3 Auth.

As mentioned earlier, SNMP V3 is a more secure SNMP protocol. In this part, the

user will be able to set a password and an encryption key to enhance the data

security. When SNMP V3 is chosen, the users can configure SNMP V3's

authentication and encryption parameters. MD5 (Message-Digest algorithm 5) is

used for authentication password and DES (Data Encryption Standard) is used

for data encryption algorithm. Figure "WBM "Diagnostics" Page – "SNMP Tab",

SNMP V3 Auth." shows the SNMP V3 Authentication (Auth.) Setting options.

Figure 34: WBM "Diagnostics" Page – "SNMP Tab", SNMP V3 Auth.

Factory Default

Description

Trap

Choose between Trap mode or Inform mode.

Null

Enter the IP address of your Trap Server.

162

Enter the Trap server's service port.

Null

Enter the community string for authentication. The maximum

length of the string is 15 characters.

Configuration in the WBM

Manual

1.0.01

Table of Contents

Table of Contents

852-1328