Table of Contents
Advertisement
76
Configuration in the WBM
7.7.3
Backup/Restore
The Backup/Restore tab page allow the user to back up the current configuration
of the switch to a file, save the configuration file on the local PC, or upload a new
configuration from a previously saved configuration file. Figure "WBM
"Maintenance" Page – "Backup/Restore" Tab" shows the Backup/Restore tab
page where it can be divided into two parts: Backup the Configuration and
Restore the Configuration.
When clicking on the [Download] button on the upper part of the page (Backup
the Configuration box), the user will be prompted to save or keep the file name
852-1322_XXX.XXX.XXX.XXX.ini by the Web browser. Choosing to Save File
will back up the switch's current configuration to your local drive on the local PC.
Figure 50: WBM "Maintenance" Page – "Backup/Restore" Tab
To restore a configuration file to the switch, click on [Browse...] button to open a
file chooser to select a configuration file from the local drive of your PC. Before
clicking the [Upload] button, the user can check any of the options above the file
name, which are "Keep the username & password configuration" and "Keep the
network configuration". These two options will help to prevent the users from un-
necessary logging-in to the switch using previously stored username, password,
and/or network configuration after settings are restored.
Manual
1.0.01
852-1322/852-1328 Industrial Managed Switch
Advertisement
Chapters
Table of Contents
