852-1322/852-1328 Industrial Managed Switch
Pos: 20. 9 /Seri e 85 2 (E THERNET- Zub ehö r)/G erä teb eschr eibu ng/Ansc hlüsse /Anschlüs se 8 52- 150 5_0 00- 001 Sp ann ungs vers org ung @ 33 \mo d_1 542 286 086 447 _21. docx @ 50 833 2 @ 3 @ 1
3.2.2
Power Supply (PWR/RPS)
The female connector (Item No. 2231-105/026-000) can easily be connected to
the 5-pole male connector (Item No. 231-435/001-000) located on the top of the
switch.
Both PWR and RPS support input voltage between 9 and 48 VDC.
The male connector shows the following pin assignment:
Figure 4: Power Supply Connector
Table 5: Legend for Figure "Power Supply (PWR/RPS/F.G.)"
Connection
+
-
+
-
Warning: Damage to property caused by electrostatic discharge (ESD)!
DC Powered Switch: Power is supplied through an external DC power source.
Since the switch does not include a power switch, plugging its power adapter into
a power outlet will immediately power it on.
Description
Description
RPS
Secondary DC input
RPS
Secondary DC input
PWR
Primary DC input
PWR
Primary DC input
F.G.
Functional Ground
Device Description
Manual
1.0.01
19