Ieee 802 1X Port Setting; Table 35: Wbm "Security" Page - "802.1X" - "802.1X Parameter Setting" Tab - WAGO 852-1322 Manual

72 Configuration in the WBM
Table 35: WBM "Security" Page – "802.1X" – "802.1X Parameter Setting" Tab
Parameters
Quiet Period
Tx Period
Supplicant
Timeout
Server Timeout
Maximum
Requests
Reauth Period
7.6.3.3 IEEE 802
The user can configure the 802
WAGO secure switch as shown in Figure "WBM "Security" Page – "802.1X" –
"802.1X Port Setting" Tab". Each port can be set for any of the four authorization
modes which are Force Authorization (FA), Force Unauthorization (FU), IEEE
802 1X Standard Authorization (AU), and no authorization (NO
.
Table "WBM "Security" Page – "802.1X" – "802.1X Port Setting" Tab".
Manual
1.0.01
Factory Default Description
60 Waiting time before a new request can be submitted after the
authorization failed. The range is from 10 to 65535 seconds.
15 Waiting time for the supplicant's EAP response before
retransmitting another EAP request. The range is from 10 to
65535 seconds
30 Waiting time for the supplicant to respond to the
authentication server's EAP packet. The range is from 10 to
300 seconds.
30 Waiting time for the authentication server to respond to the
supplicant's EAP packet.The range is from 10 to 300
seconds.
2 The maximum number of the retransmissions that the
authentication server can send the EAP request to the
supplicant before the authentication session times out. The
range is from 2 to 10 times.
3600 Time between the periodic re-authentication of the
supplicant. The range is from 30 to 65535 seconds.
.
1x Port Setting
.
852-1322/852-1328 Industrial Managed Switch
1x security mechanism on each port of the
, as described in
(