Reset To Default; Figure 48: Wbm "Maintenance" Page - "Reset To Default" Tab; Figure 49: Login Web Page - WAGO 852-1322 Manual

Managed switch; 8 port gb; macsec/ 6 port gb; 2foc; macsec

Hide thumbs Also See for 852-1322:

Table of Contents

852-1322/852-1328 Industrial Managed Switch

7.7.2

Reset to Default

When the switch is not working properly, the user can reset it back to the original

factory default setting by clicking on the [Reset] button as shown in Figure "WBM

"Maintenance" Page – "Reset to Default" Tab". When the switch is restarted, the

web browser will be re-directed to the login web page as depicted in Figure

"Login Web Page". Note that there is no physical reset button on the front panel

of the box; therefore, the user will have to either using the [Reset] button on this

page.

Figure 48: WBM "Maintenance" Page – "Reset to Default" Tab

Configuration in the WBM

Manual

1.0.01

Table of Contents

Table of Contents

852-1328