Port Settings; Setting; Table 19 Wbm "Configuration" Page - "System Settings" Tab - WAGO 852-1328 Product Manual

Configuration in the WBM
The description of each parameter and its default value in Network Settings tab page are
summarized in Table "WBM "Configuration" Page – "Network Settings" Tab".
Parameters
DHCP
Static IP Address
Subnet Mask
Gateway
Primary DNS

10.4.5 Port Settings

10.4.5.1 Setting

The user can control the state of each port by either selecting Enable or Disable from the
dropdown list as shown in Figure "WBM "Configuration" Page – "Port Settings" Tab". After
finishing any change on the port setting, please click on the [Submit] button.
42 Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 28: WBM "Configuration" Page – "Network Settings" Tab
Table 19: WBM "Configuration" Page – "System Settings" Tab
Factory Default Description
Unchecked By checking this box, an IP address and related parameters will
be automatically assigned. Otherwise, user can set up the static
IP address and related fields manually.
192.168.1.254 This field displays current IP address. The user can also set a new
static IP address for the device.
255.255.255.0 This field displays current subnet mask. The user can set a new
subnet mask in this field.
0.0.0.0 This field shows current Gateway's IP address. The user can set a
new IP address for the Gateway in this field.
Null The user can set the primary DNS' IP address used by your net-
work in this field.
852-1328