Table of Contents
Advertisement
Properties
4.2 Label
Custom Name
Item-No
IN
Ambient Temp
MAC
Default IP
Serial NO
QR code
4.3 Connectors
4.3.1 Grounding screw
The switch must be grounded. Connect the grounding screw to the ground potential. Do
not operate the switch without an appropriately installed protective earth conductor.
4.3.2 Power Supply
The female connector (Item No. 2231-105/026-000) can easily be connected to the 5-
pole male connector (Item No. 231-435/001-000) located on the top of the switch.
Both PWR and RPS support input voltage between 9 and 48 VDC.
The male connector shows the following pin assignment:
16
Product manual | Version: 1.2.0
Industrial Managed Switch
Description
Item number
Device input and maximum current and voltage
Device input and maximum current and voltage
Device MAC information
Device default IP address
Device serial number
Firmware Version (left digit sequence) (02)
Hardware Version (right digit sequence) (02)
Connect to product information by scanning this QR code
852-1322
Figure 3: Label
Table 3: Legend for Figure „Label"
Figure 4: Grounding screw
Advertisement
Chapters
Table of Contents
