Connectors; Power Supply (Pwr); Figure 3: Power Supply (Pwr) Port; Table 5: Legend For "Power Supply (Pwr) Port" Figure - WAGO ETHERNET Accessories 852 852-0111 Mounting, Installation And Handling Manual

20 List of Figures
4.2

Connectors

4.2.1

Power Supply (PWR)

The female connector can easily be connected to the 3-pole male connector
located on the top of the ECO switch.
The male connector shows the following pin assignment:

Figure 3: Power supply (PWR) port

Table 5: Legend for "Power supply (PWR) port" figure

Pin
+
-
Y
Damage to Property Caused by Electrostatic Discharge (ESD)!
Industrial ECO switch for DC operation: Power supply is provided via an external
direct-current power source. As the industrial ECO switch is not equipped with a
power switch, it switches on immediately when you apply the direct-current
power supply.
Manual
Version 1.2.0, valid from FW/HW Version 01/06
852-0111 5 Port 100BASE-TX Industrial ECO Switch
Description Description
PWR Primary DC input
PWR Primary DC input
GND Ground potential (functional earth)
WAGO ETHERNET Accessories 852