Table of Contents
Advertisement
Important Safety Instructions
Chapter 1
Introduction
Important Safety Instructions
Safety Requirements
When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and other personal injury, including the following:
•
Please read and understand all instructions.
•
Follow all warnings and instructions marked on the product.
•
Unplug this product from the wall outlet before cleaning; a damp cloth should be used for
cleaning, do not use liquid or aerosol cleaners.
•
Do not use this product near water, such as in a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool.
•
Do not place this product on an unstable table, stand, or card table; the product may fall,
causing serious damage to the product or serious injury to those nearby.
•
Slots and openings in the KSU and the back or bottom are provided for ventilation, to
protect it from overheating, these openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, or other similar surface.
This product should never be placed near or over a radiator or other heat source. This
product should not be placed in a built-in installation without proper ventilation.
•
This product should be operated only from the type of power source indicated on the
product label. If you are not sure of the type of power supply to your location, consult your
dealer or local power company.
•
Do not allow anything to rest on the power cord. Do not locate this product where the cord
could be abused by people walking on it.
•
Do not overload wall outlets and extension cords as this can result in the risk of fire or
electric shock.
•
Never push objects of any kind into this product through KSU slots or connectors as they
may touch dangerous voltage points or short out parts that could result in a risk of fire or
electric shock. Never spill liquid of any kind on the product.
Release 1.0
MBX IP Hardware & Installation Guide
1-1
Chapter 1: Introduction
November 2010
Advertisement
Table of Contents
