Scanner Communication And Scanning - Honeywell Granit XP 199 i Series User Manual

Scanner Communication and Scanning

The following feedback is provided by the scanner and indicates communication
and scanning status.
LED
Normal Operation
Green Flash
Red, Blinking
Menu Operation
Green Flash
Red, Blinking
Querying battery volume by three times trigger in 2 seconds when the scanner is
out of the base will activate the battery status icon.
Note: This functionality is only available with the smart battery pack.
Battery Icon
LED
Querying
battery volume
by three times
trigger in 2
seconds when
the scanner is
out of the base
will activate the
battery status
icon
When the
scanner is in
the base
46
Beeper
1 Beep
Razz or Error Tone
2 Beeps
Razz or Error Tone
Red Yellow
3 sets of
quick flashes
in a row
3 sets of
quick flashes
in a row
2 sets of
flashes then
off 10
seconds
2 sets of
flashes then
off 10
seconds
Cause
Successful communication or linking
Failed communication
Successful menu change
Unsuccessful menu change
Scanner
Green
Beep
No beep
No beep
3 sets of No beep
quick
flashes in a
row
No beep
No beep
2 sets of No beep
flashes then
off 10
seconds
Steady on No beep
Charge
Level
<20%
20%-40%
>40%
<20%
20%-40%
>40%
100%
Granit XP User Guide