Honeywell Granit XP 199 i Series User Manual page 192

Default = Don't Require 5 Digit Addenda.
* Don't Require 5 Digit Addenda
Addenda Timeout
You can set a time during which the scanner looks for an addenda. If an addenda is
not found within this time period, the data can be either transmitted or discarded,
based on the setting you are using for
length (in milliseconds) for this timeout by scanning the barcode below, then set-
ting the timeout (from 0-120 milliseconds) by scanning digits from the
Programming Chart,
500.
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
EAN/JAN-13 Addenda Separator
When this feature is On, there is a space between the data from the barcode and
the data from the addenda. When turned Off, there is no space. Default = On.
Note: If you want to enable or disable EAN13 with Extended Coupon Code, refer to
EAN-13 with Extended Coupon Code
174
beginning on page 291 of this manual, then Save. Default =
Addenda Timeout
* On
EAN/JAN-13 Addenda
(page 163).
Require 5 Digit Addenda
Required. Set the
Off
UPC-A/
Granit XP User Guide