Honeywell Granit XP 199 i Series User Manual page 187

EAN/JAN-13 Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not. Default = On.
EAN/JAN-13 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
EAN/JAN-13 Addenda Required
When Required is scanned, the scanner will only read EAN/JAN-13 barcodes that
have addenda. Default = Not Required.
Granit XP User Guide
* On
2 Digit Addenda On
5 Digit Addenda On
Required
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* Not Required
169