Table of Contents
Advertisement
EZConfig for Scanning Introduction
EZConfig for Scanning provides a wide range of PC-based programming functions
that can be performed on the scanner connected to your PC. EZConfig for Scan-
ning allows you to download upgrades to the scanner's firmware, change pro-
grammed parameters, and create and print programming barcodes. Using
EZConfig for Scanning, you can even save/open the programming parameters.
This saved file can be e-mailed or, if required, you can create a single barcode that
contains all the customized programming parameters and mail or fax that barcode
to any location. Users in other locations can scan the barcode to load in the cus-
tomized programming.
Configure with EZConfig for Scanning
Use the EZConfig for Scanning tool to configure your scanner online:
1. Access the Honeywell Technical Support Downloads Portal at
2. Go to Software > Barcode Scanners > Software > Tools and Utilities >
3. Download the Setup version of EZConfig for Scanning.
4. Open EZConfig to configure your scanner.
Granit XP User Guide
hsmftp.honeywell.com.
EZConfig for Scanning > Current.
https://
227
Advertisement
Table of Contents
