Add A Prefix Or Suffix; Example: Add A Tab Suffix To All Symbologies; Clear One Or All Prefixes Or Suffixes - Honeywell Granit XP 199 i Series User Manual

•
•

Add a Prefix or Suffix:

Step 1.
Step 2.
Step 3.
To add the Code I.D., scan 5, C, 8, 0.
To add the AIM I.D., scan 5, C, 8, 1.
To add the serial number, scan 5, C, 8, 8.
To add a backslash (\), scan 5, C, 5, C.
Note: When adding a backslash (\), you must scan 5C twice – once to create the leading
backslash and then to create the backslash itself.
Step 4.
Step 5.
Repeat the steps above to add a prefix or suffix for another symbology.

Example: Add a Tab Suffix to All Symbologies

Step 1.
Step 2.
Step 3.
Step 4.

Clear One or All Prefixes or Suffixes

You can clear a single prefix or suffix, or clear all prefixes/suffixes for a symbology.
If you have been entering prefixes and suffixes for single symbologies, you can use
Clear One Prefix (Suffix) to delete a specific character from a symbology. When
you Clear All Prefixes (Suffixes), all the prefixes or suffixes for a symbology are
deleted.
116
When setting up for specific symbologies (as opposed to all symbologies), the
specific symbology ID value counts as an added prefix or suffix character.
The maximum size of a prefix or suffix configuration is 200 characters, which
includes header information.
Scan the Add Prefix or Add Suffix symbol
Determine the 2 digit hex value from the
on page 279) for the symbology to which you want to apply the prefix or
suffix. For example, for Code 128, Code ID is "j" and Hex ID is "6A".
Scan the 2 hex digits from the
291, or scan 9, 9 for all symbologies.
Repeat Steps 2 and 3 for every prefix or suffix character.
Scan Save to exit and save, or scan Discard to exit without saving.
Scan Add Suffix.
Scan 9, 9 from the
this suffix to all symbologies.
Scan 0, 9 from the
corresponds with the hex value for a horizontal tab, shown in the
Conversion Chart (Code Page 1252),
Scan Save, or scan Discard to exit without saving.
Programming Chart,
Programming Chart,
Programming Chart,
beginning on page 282.
(page 117).
Symbology Charts
beginning on page
beginning on page 291 to apply
beginning on page 291. This
Granit XP User Guide
(beginning
ASCII