Honeywell Granit XP 199 i Series User Manual page 162

Codabar Concatenation
Codabar supports symbol concatenation. When you enable concatenation, the
scanner looks for a Codabar symbol having a "D" start character, adjacent to a
symbol having a "D" stop character. In this case the two messages are concate-
nated into one with the "D" characters omitted.
Select Require to prevent the scanner from decoding a single "D" Codabar symbol
without its companion. This selection has no effect on Codabar symbols without
Stop/Start D characters.
Codabar Message Length
Scan the barcodes below to change the message length. Refer to
Description
lengths = 2-60. Minimum Default = 4, Maximum Default = 60.
Minimum Message Length
144
On
Require
(page 142) for additional information. Minimum and Maximum
A 1 2 3 4 D D 5 6 7 8 A
* Off
Message Length
Maximum Message Length
Granit XP User Guide