Honeywell Granit XP 199 i Series User Manual page 25

1. Connect the appropriate interface cable to the device, then to the computer.
2. If you are connecting the base horizontally, make sure the cables are secured in
Note: The power supply must be ordered separately, if needed.
3. Turn the terminal/computer power back on. The scanner beeps.
4. Verify the scanner or cordless base operation by scanning a barcode from the
For further RS485 settings, refer to RS485, page 14.
Granit XP User Guide
Corded Granit XP Scanner RS485 Connection:
the wireways in the bottom of the cordless base and the base sits flat on a
horizontal surface.
CCB22-100BT-03N Base RS485 Serial Port Connection:
Sample Symbols, beginning on page 289. The scanner beeps once.
7