Code 39 - Honeywell Granit XP 199 i Series User Manual

Code 39

Code 39 On/Off
If you are reading Code 39 barcodes, Codablock A should remain disabled. If you
are enabling Codablock A (see
39.
Code 39 Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the barcode. You
may either transmit, or not transmit Start/Stop characters. Default = Don't Trans-
mit.
Code 39 Check Character
No Check Character indicates that the scanner reads and transmits barcode data
with or without a check character.
When Check Character is set to Validate, but Don't Transmit, the unit only reads
Code 39 barcodes printed with a check character, but will not transmit the check
character with the scanned data.
Granit XP User Guide
< Default All Code 39 Settings >
* On
Transmit
Codablock A on page 181), you should disable Code
Off
* Don't Transmit
145