Set Up a Fixed IP Address in Windows Vista or Windows 10
•
In Windows Vista, click Start / Control Panel / Select Network and Internet / Network and Sharing
Center.
•
In Windows 10, right-click Start, then select Control Panel. Select Network and Internet / Network
and Sharing Center.
•
Click Manage Network Connections in the list of tasks.
•
Right-click your local area connection and click Properties.
•
Select Internet Protocol (TCP/IP) from the list
•
Click the Properties button.
Click Use the Following IP address and enter the following:
IP address:
192.168.1.2
Subnet mask:
255.255.255.0
Default gateway:
192.168.1.1
Click OK to close the configuration windows, and you should now be able to access the MP-60 via your
Internet browser.
Streaming Setup
The MP-60 can access music files on your local network or on a FAT32 formatted storage device connected
to any of the USB A inputs, and you can stream music to the MP-60 from your mobile devices.
In this menu you can configure the basic setup of the music streaming:
•
Streaming players can control volume – set to Off or On
•
Streaming players can change input source – set to Off or On
•
Streaming players can power on the device from standby mode – set to Off or On
Streaming Playback
The setup of the streaming player itself is done in the interface positioned in the HOME section.
Airplay
When the MP-60 is connected to your local network, it will automatically be available from your
Airplay enabled devices.
Spotify Connect
When the MP-60 is connected to your local network, it will automatically be available from your
Spotify Connect enabled devices (requires a Spotify Premium account)
UPnP
Lyngdorf Audio MP-60 – Owner's manual
30