Pre-Installation; Unpacking The Product - Lyngdorf Audio MP-60 Owner's Manual

Pre-Installation

Please read all material carefully prior to installation. If you need additional assistance, contact your Lyngdorf
Audio representative or visit Lyngdorf.com.

Unpacking the Product

Carefully remove the unit and accessory kit from the carton and check for shipping damage. Contact the
shipper and your Lyngdorf Audio representative immediately if the unit bears any sign of damage.
Note: Keep the shipping carton and all packing material for future use. If this unit is
shipped for service without the original packing, damage could occur and void the
Inventory
Check the list below to ensure that all necessary product components have been delivered. Report all
discrepancies to your Lyngdorf Audio representative immediately.
•
Owner's manual
•
Power cord
•
Remote
•
Microphone
•
Microphone stand
•
Microphone cable
•
Rack ears
Operating Voltage
Lyngdorf Audio products must be connected to the mains power system only. The MP-60 will automatically
detect voltages between 100-240V.
Ventilation Requirements
The MP-60 does not have a built-in fan, nor does it require special measures to ensure proper heat
dissipation. It should be placed according to these guidelines:
•
It should always have at least one inch / 25mm of free space on all sides.
•
It should be placed in an environment free of excessive heat.
•
In a rack system, the MP-60 should be placed at the bottom of the rack, still with at least one inch /
25mm free space on top and sides.
Lyngdorf Audio MP-60 – Owner's manual
warranty.
6