Network Setup - Lyngdorf Audio MP-60 Owner's Manual

Network Setup

Connecting to MP-60 with a Network Cable
It is possible to get access to the MP-60´s web interface via a direct cable connection between the MP-60
and a computer, or a connection via a hub or switch.
If you have a direct cable connection to a laptop (with no switch or router between the two) the network cable
must be a crossover type. Furthermore, the Mode option in the Network Setup menu must be set to Manual
IP. Finally, you must manually set an IP address on the computer you intend to use for setting up the MP-60.
Lyngdorf Audio MP-60 – Owner's manual 28