Lyngdorf Audio MP-60 Owner's Manual page 16

Channel Designation
You should activate the speaker channels, which are in accordance with the DECODING FORMAT that you
want to optimize – you should NOT focus on the actual position of the speaker. (ex.: the first surround
speakers for a Dolby format are always LS and RS – also if they are positioned on the back wall). The
available speaker positions are:
Designations Channel Description
Subwoofers:
LFE Low Frequency Effects (Mono)
SUB L Left Channel Subwoofer (Stereo / does not handle LFE, if LFE Subwoofer is activated)
SUB R Right Channel Subwoofer (Stereo / does not handle LFE, if LFE Subwoofer is activated)
SUB RR Right Rear Channel Subwoofer
SUB LR Left Rear Channel Subwoofer
Low level speakers:
L Left (Bi-amping available, if AUX outputs are available)
R Right (Bi-amping available, if AUX outputs are available)
C Center
LS Left surround
RS Right surround
LRS Left rear surround (only available, if LS and RS are activated)
RRS Right rear surround (only available, if LS and RS are activated)
CB Center back
Speakers designated according to Dolby ATMOS and DTS:X specifications:
LW Left wide
RW Right wide
LTF Left top front
RTF Right top front
LTM Left top middle (only available, if RTF and RTM are activated)
RTM Right top middle
LTR Left top rear
RTR Right top rear
Speakers designated according to AURO 3D specifications:
HL Height left
HR Height right
HLS Height left surround
HRS Height right surround
HLR Height left rear surround
HRR Height right rear surround
HC Height center
TOP Top ceiling (aka: Voice of God)
Lyngdorf Audio MP-60 – Owner's manual 16