System Configuration
General Setup
Power management
•
Choose the standby mode
Deep sleep – The MP-60 can be turned on via remote control or the front on/off switch (Default)
o
o
Network Stand-By - The MP-60 can also be turned on via web interface, Remote App. or a
RS232 based control system.
•
Choose the delay before the processor automatically turns off, when no audio or video is processed.
Setting it to 0 will disable the feature (always on).
Default volume settings
•
Set a max volume for the device (dB). This setting is a safety precaution.
•
Set startup volume
Use last volume – Sets the volume to be the same as when the MP-60 was turned off.
o
Use fixed volume – Sets the default volume at startup.
o
HDMI CEC settings
Set enable CEC and use ARC channel as audio input to Off or On.
Display timeout
Set seconds before turning off the display.
Password protection
Activate password protection for entering the setup menu from the remote control. The password is 7800.
Show bypass
Allow for RoomPerfect™ to be set to bypass mode for demonstration purpose.
Enable front IR sensor
Turn the MP-60´s IR sensor Off or On. This function is useful if you are using a home automation system and
other remotes are using the same IR codes as the MP-60 remote.
Lyngdorf Audio MP-60 – Owner's manual
26