Table of Contents
Advertisement
Quick Set-up guide
Connect speakers, sources and power
1.
Connect the speakers to the Speaker Output connectors.
2.
Connect all external equipment, audio and video, mains power, etc. to the TDAI-3400.
3.
If possible, connect the TDAI-3400 to your local network with an ethernet cable.
4.
Switch on the mains switch on the back of the TDAI-3400.
The TDAI-3400 will boot the internal computer and go into Stand-By.
5.
Switch on the TDAI-3400.
The TDAI-3400 will initially want to connect to your local network.
If connected by network cable (LAN) the TDAI-3400 will automatically connect and display the IP
network reference.
Connect to Wi-Fi using iPhone or iPad
If no wired network is attached, the TDAI-3400 will want to connect via Wi-Fi – referring to "Apple Wi-Fi
Accessory Configuration".
1.
Open the Wi-Fi settings on your iPhone/iPad – and you will find the TDAI-3400 under "Setup New
Airplay Speaker".
2.
Change the device name of your TDAI-3400, press Next, and the TDAI-3400 will copy the Wi-Fi
settings from your phone
Connect to Wi-Fi using Android phone or tablet
The TDAI-3400 will establish a soft access point. Type 192.168.110.42 in your browser to access the manual
Wi-Fi setup.
Connect to Wi-Fi manually
Without iPhone/iPad you can manually enter all data or use the WPS function to pair the TDAI-3400 with
your Wi-Fi router. (Select WPS and go and press the WPS button on your router)
Finish the setup with Lyngdorf Audio app or web browser
You can now continue with the Speaker Setup, Input Setup, Output Setup, RoomPerfect
Audio app on your phone or tablet, or via the web interface by typing the following in a browser:
tdai3400.local.
All setup options are further described in the TDAI-3400 Owner's Manual. If you do not want to continue
doing setup or calibration, then exit the menu by a long push on the menu button. The TDAI-3400 will now
have a basic stereo setup, and you can play music.
Lyngdorf TDAI-3400 Quick guide
TM
in the Lyngdorf
7
Advertisement
Table of Contents
