Speakers And Room - Lyngdorf Audio MP-60 Owner's Manual

Speakers and Room

You need to configure the MP-60 according to your speaker setup, setting the sizes of the speakers, so that
the Bass Management function can optimize the overall performance. In the setup page the connectors will
be highlighted with information as to signal type.
The purpose of the speaker setup is to tell the system which speakers and subwoofers are available and
how big the speakers are, which in turn reveals how much bass the speakers are capable of reproducing
(Bass cut-off frequency). The bass for each speaker channel is directed to the optimal output.
References to "speakers" in this document are specific to satellite or full-range speakers and do not include
subwoofers.
Speaker setup
As factory default the MP-60 is displaying a 7.1 speaker configuration as shown below:
The setup page is an overview of the available speaker outputs.
In order to correct the setup, you press EDIT CONFIGURATION, and by selecting each speaker or
subwoofer, you can specify size/bass cut-off and level.
Always SAVE the corrected setup before choosing another menu
Lyngdorf Audio MP-60 – Owner's manual 15